HIAB Lorry Loader Training Courses
DOLIFTS FLT Training Ltd provides Onsite RTITB and BRITTOp accredited HIAB Vehicle Mounted Hydraulic Lorry Loader Training Courses for business customers in Wirral, Liverpool, Merseyside, and North West regions.
For HIAB/PalFinger Lorry Loader Training Courses delivered ONSITE, please call DOLIFTS on 0151 678 4400 for more details.
HIAB Lorry Loader Training Courses
Often referred to as the HIAB Vehicle Mounted Hydraulic Lorry Loader, our HIAB Lorry Loader Training Courses are split into four operating experience levels.
HIAB Novice Courses – HIAB Refresher Courses – HIAB Conversion Courses – HIAB Experienced Courses.
Please choose the course that best describes your current use of a HIAB Lorry Loader.
NOTE – We cover all aspects of Manual Chassis control, Seated control, and Remote control HIAB Lorry Loaders and offer training on all associated attachments (Hook, Clamshell, Brick/Block Clamp, Pallet Forks, Auger Drill etc).
HIAB Lorry Loader Novice Course
Our Onsite RTITB/BRITTOp Accredited HIAB Lorry Loader Novice Training Courses are available to businesses throughout Wirral, Liverpool, Merseyside and North West regions.
Call DOLIFTS today to book your HIAB lorry loader operator novice course or to discuss your training needs further – 0151 678 4400.
HIAB Lorry Loader Novice Course Details
Who is the HIAB Lorry Loader Novice Course for?
The RTITB and BRITTOp accredited HIAB Lorry Loader Novice Training Course is designed for those with no, or very limited, experience of using a HIAB (Vehicle Mounted) Hydraulic Lorry Loader.
HIAB Lorry Loader Novice Course – Eligibility
The RTITB, BRITTOp, and Health & Safety Executive (HSE) have set guidance and some eligibility criteria for attending these HIAB Lorry Loader Novice Training Courses.
HIAB Lorry Loader Novice Course – Eligibility Criteria
Experience Level – This HIAB Lorry Loader Novice Course is for those with no, or very limited, experience of using a HIAB Lorry Loader.
Age – To attend this HIAB Lorry Loader Novice Course and operate a HIAB Lorry Loader crane attachment in the workplace you must be at least school leaving age (16). Please note, subject to a risk assessment, if you are under the age of 18 you may need to be supervised in the workplace when using a HIAB Lorry Loader until you reach the age of 18. In addition, no person under the age of 18 can use a HIAB Lorry Loader on docks, or ports.
Language – This HIAB Lorry Loader Novice Course has multiple classroom-based theory lessons throughout. A written theory test is also mandatory. In addition, the safe use of a HIAB Lorry Loader requires that the operator reads and understands any safety signs, local safety notices, and can thoroughly understand the manufacturer’s operator handbook for the HIAB Lorry Loader being used.
The practical training aspect of this HIAB Lorry Loader Novice Course, and the mandatory practical test of operating skills, involves continuous verbal instructions that the trainee must be able to understand and act upon in a safe manner.
Therefore, good comprehension of English language and literacy are important for attending this HIAB Lorry Loader Novice Course.
Note – In extreme cases, an accredited translator can be used for the purposes of testing. The chosen translator must not be a candidate on the HIAB Lorry Loader Novice Course and must not alter the sense of any of the answers given by the candidate. If required, please seek legal advice on the use of an accredited translator.
Medical – There is currently no legislation or clear medical guidance available in relation to the specific use of a HIAB Lorry Loader. In general, we would apply the HSE principle that each person’s fitness for operating a HIAB Lorry Loader should be judged individually to ensure that people with disabilities are not disadvantaged but competence in an emergency must always be considered.
We would therefore generally follow the health guidance issued by the DVSA for Group 1 entitlement if the need arises to assess capabilities for operating a HIAB Lorry Loader.
Essentially, if you are not, or would not be restricted in obtaining a UK driving licence, then there should be no restrictions in operating a HIAB Lorry Loader in normal circumstances.
Note – Individuals who suffer from a fear of heights, vertigo, giddiness or difficulty with balance must not operate a HIAB Vehicle-mounted Hydraulic Lorry Loader. All trainees are required to sign a medical declaration at the beginning of these HIAB Lorry Loader Novice Courses.
Driving Licence – You do not need a driving licence (car/lorry licence) to attend this HIAB Lorry Loader Novice Course, nor do you need a driving licence to operate a HIAB Lorry Loader on business premises or public areas (unless you are the sole driver/HIAB operator of the main vehicle).
HIAB Lorry Loader Novice Course – Duration
DOLIFTS RTITB/BRITTOp accredited HIAB Lorry Loader Novice Course is designed to instruct up to a maximum of 3 training candidates per course.
The course duration, or number of training hours/days required for a HIAB Lorry Loader Novice Course, depends upon the number of training candidates attending the course.
- 1 Novice Candidate = 7 hrs (1 day)
- 2 Novice Candidates = 10.5 hrs (2 days)
- 3 Novice Candidates = 14 hrs (2 days)
HIAB Lorry Loader Novice Course – Syllabus
Your RTITB or BRITTOp instructor will follow recognised training and testing standards specifically devised for the HIAB Lorry Loader Novice Course.
Training candidates will gain an understanding of current relevant legislation, be informed of the very best operating practices to be capable of using the HIAB Lorry Loader in the correct and safe manner, and use a HIAB Lorry Loader in line with current approved operating methods, and manufacturer’s instructions.
The HIAB Lorry Loader Novice Course Syllabus includes:
- Course Introduction
- Theory
- Introduction to the HIAB Lorry Loader
- Introduction to the Hydraulic System
- Siting of the HIAB Vehicle-mounted Hydraulic Lorry Loader
- Correct Deployment of the Stabiliser Legs
- Use of the HIAB Vehicle-mounted Hydraulic Lorry Loader Controls
- Pre-use Inspection
- Operating the HIAB Vehicle-mounted Hydraulic Lorry Loader
- Theory Test
- Pre-Use Inspection Test
- Basic Operating Skills Test (Assessment)
- Course Close/Feedback
HIAB Lorry Loader Novice Course – Tests
To pass the RTITB/BRITTOp accredited HIAB Lorry Loader Novice Course, and receive an official RTITB or BRITTOp accredited operator certificate for a HIAB Lorry Loader, all training candidates must successfully complete 3 tests: –
- Theory Test for HIAB Lorry Loader
- Pre-Use Inspection Test for HIAB Lorry Loader
- Basic Operator Skills Test for HIAB Lorry Loader
HIAB Lorry Loader Novice Course – Theory Test Guidance Notes
The HIAB Lorry Loader Novice Course theory test is compiled of 25 questions.
This consists of 5 Open Questions + 20 Multiple-Choice Questions.
5 of the multiple-choice questions are Mandatory Safety Questions that must be answered correctly.
Each question carries a maximum of 4 marks.
You must achieve a minimum score of 80% to pass the HIAB Lorry Loader Novice Course theory test. Failure to achieve 80% will result in a referral (course failed). A re-test will be required after a period of remedial training.
(You can view a mock theory test here – RTITB HIAB Lorry Loader Mock Theory Test).
HIAB Lorry Loader Novice Course – Pre-Use Inspection Test Guidance Notes
The HIAB Lorry Loader pre-use inspection test is a visual and physical examination of the HIAB Lorry Loader.
You will be checking that the HIAB Lorry Loader is legal and safe before use.
This requires that you identify numerous parts and components of the HIAB Lorry Loader and clearly state to your examiner what potential faults or damage you are looking for.
From all potential parts/components of a HIAB Lorry Loader, there are 16 safety critical mandatory parts and components that must be identified and discussed during this pre-use inspection test.
Failure to identify and discuss just one of those 16 safety critical mandatory checks will result in a referral (course failed). A re-test will be required after a period of remedial training.
(You can view a demonstration of a HIAB Lorry Loader pre-use inspection here – HIAB Lorry Loader Pre-Use Inspection).
HIAB Lorry Loader Novice Course – Basic Operator Skills Test Guidance Notes
The HIAB Lorry Loader Novice Course practical skills test has been devised to examine the critical skills required of a HIAB Lorry Loader operator at a reasonable working pace, which includes:
- Mounting and Dismounting
- Starting and stopping the machine
- Deploying/stowing the HIAB lorry loader stabilisers
- Using hydraulic controls correctly and sympathetically
- Judging the position of the attachments at varying heights and orientations
- Control whilst slewing
- Loading and unloading the vehicle
- Placing loads accurately into pre-determined designated locations (using hook, hydraulic clamp, or pallet forks)
- Picking up, moving, and depositing loose material accurately into designated locations (using clamshell)
- Demonstrating sufficient situational awareness during operations
The HIAB Lorry Loader Novice Course practical skills test is marked on a penalty points system. You gain penalty points for all safety faults that occur. Exceeding the maximum permitted penalty points will result in a referral (test failed). A re-test will be required after a period of remedial training. Your instructor will inform you of the maximum points permitted.
The HIAB Lorry Loader practical skills test is also a time restricted test, with penalty points incurred for exceeding set times. Exceeding the maximum permitted set time will result in a referral (test failed). A re-test will be required after a period of remedial training. Your instructor will inform you of the maximum permitted time.
There are also 6 safety critical factors that your examiner will be looking for and will halt the test immediately if any of those 6 safety critical factors occur. This would result in a mandatory disqualification and a referral (failed test). A re-test will be required after a period of remedial training.
Note – Your RTITB instructor will identify and explain all potential safety faults throughout the duration of your HIAB Lorry Loader Novice Training Course and will deliver corrective training on each as they occur.
(An overview of the HIAB practical skills test marking sheet can be seen here – HIAB Lorry Loader Practical Test Marking Sheet).
HIAB Lorry Loader Novice Course – Qualification
On successful completion of your HIAB Lorry Loader Novice Course, you will receive an official RTITB or BRITTOp Accredited HIAB Lorry Loader Operator Certificate and a DOLIFTS issued Photo ID Card, which are valid for 3 years from the HIAB Lorry Loader Novice Course test completion date.
The successful outcome of your HIAB Lorry Loader Novice Course is registered onto the *RTITB NORS Database for 3 years, at which point you will be required to attend a HIAB Lorry Loader Refresher Course for re-registration.
You will receive a unique (9-digit) RTITB Operator Registration Number.
*Note – The RTITB NORS Database (National Operators Registration Scheme Database) is a secure database of RTITB qualified operators and instructors. Businesses and potential Employers can freely access NORS to easily verify the authenticity of an RTITB HIAB Lorry Loader Novice course certificate by typing in the 9-digit operator registration number found on the certificate.
HIAB Lorry Loader Novice Course – Prices
Please contact DOLIFTS for HIAB Lorry Loader Novice Course pricing.
Office: 0151 678 4400
Mobile: 07743 007084
Or fill in our Contact Form
HIAB Lorry Loader Refresher Course
Our Onsite RTITB/BRITTOp Accredited HIAB Lorry Loader Refresher Training Courses are available to businesses throughout Wirral, Liverpool, Merseyside and North West regions.
Call DOLIFTS today to book your HIAB lorry loader operator refresher course or to discuss your training needs further – 0151 678 4400.
HIAB Lorry Loader Refresher Course Details
Who is the HIAB Lorry Loader Refresher Course for?
The RTITB and BRITTOp accredited HIAB Lorry Loader Refresher Training Course is designed for those who have previously received formal training on a HIAB (Vehicle Mounted) Hydraulic Lorry Loader and have documentary evidence, such as an operator certificate or verifiable training record.
HIAB Lorry Loader Refresher Course – Eligibility
The RTITB, BRITTOp, and Health & Safety Executive (HSE) have set guidance and some eligibility criteria for attending these HIAB Lorry Loader Refresher Training Courses.
HIAB Lorry Loader Refresher Course – Eligibility Criteria
Experience Level – This HIAB Lorry Loader Refresher Course is for those who have previously received formal training on a HIAB (Vehicle Mounted) Hydraulic Lorry Loader and have documentary evidence, such as an operator certificate or verifiable training record.
Age – To attend this HIAB Lorry Loader Refresher Course and operate a HIAB Lorry Loader crane attachment in the workplace you must be at least school leaving age (16). Please note, subject to a risk assessment, if you are under the age of 18 you may need to be supervised in the workplace when using a HIAB Lorry Loader until you reach the age of 18. In addition, no person under the age of 18 can use a HIAB Lorry Loader on docks, or ports.
Language – This HIAB Lorry Loader Refresher Course has multiple classroom-based theory lessons throughout. A written theory test is also mandatory. In addition, the safe use of a HIAB Lorry Loader requires that the operator reads and understands any safety signs, local safety notices, and can thoroughly understand the manufacturer’s operator handbook for the HIAB Lorry Loader being used.
The practical training aspect of this HIAB Lorry Loader Refresher Course, and the mandatory practical test of operating skills, involves continuous verbal instructions that the trainee must be able to understand and act upon in a safe manner.
Therefore, good comprehension of English language and literacy are important for attending this HIAB Lorry Loader Refresher Course.
Note – In extreme cases, an accredited translator can be used for the purposes of testing. The chosen translator must not be a candidate on the HIAB Lorry Loader Refresher Course and must not alter the sense of any of the answers given by the candidate. If required, please seek legal advice on the use of an accredited translator.
Medical – There is currently no legislation or clear medical guidance available in relation to the specific use of a HIAB Lorry Loader. In general, we would apply the HSE principle that each person’s fitness for operating a HIAB Lorry Loader should be judged individually to ensure that people with disabilities are not disadvantaged but competence in an emergency must always be considered.
We would therefore generally follow the health guidance issued by the DVSA for Group 1 entitlement if the need arises to assess capabilities for operating a HIAB Lorry Loader.
Essentially, if you are not, or would not be restricted in obtaining a UK driving licence, then there should be no restrictions in operating a HIAB Lorry Loader in normal circumstances.
Note – Individuals who suffer from a fear of heights, vertigo, giddiness or difficulty with balance must not operate a HIAB Vehicle-mounted Hydraulic Lorry Loader. All trainees are required to sign a medical declaration at the beginning of these HIAB Lorry Loader Refresher Courses.
Driving Licence – You do not need a driving licence (car/lorry licence) to attend this HIAB Lorry Loader Refresher Course, nor do you need a driving licence to operate a HIAB Lorry Loader on business premises or public areas (unless you are the sole driver/HIAB operator of the main vehicle).
HIAB Lorry Loader Refresher Course – Duration
DOLIFTS RTITB/BRITTOp accredited HIAB Lorry Loader Refresher Course is designed to instruct up to a maximum of 3 training candidates per course.
The course duration, or number of training hours/days required for a HIAB Lorry Loader Refresher Course, depends upon the number of training candidates attending the course.
- 1 Refresher Candidate = 4.5 hrs (1 day)
- 2 Refresher Candidates = 5 hrs (1 day)
- 3 Refresher Candidates = 6.5 hrs (1 day)
HIAB Lorry Loader Refresher Course – Syllabus
Your RTITB or BRITTOp instructor will follow recognised training and testing standards specifically devised for the HIAB Lorry Loader Refresher Course.
Training candidates will gain an update of current relevant legislation, be informed of the very best operating practices to be capable of using the HIAB Lorry Loader in the correct and safe manner, and use a HIAB Lorry Loader in line with current approved operating methods, and manufacturer’s instructions.
The HIAB Lorry Loader Refresher Course Syllabus includes:
- Course Introduction
- Theory update
- Introduction to the HIAB Lorry Loader
- Assessment of Operator Ability and Remedial Tuition
- Pre-use Inspection
- Theory Test
- Pre-Use Inspection Test
- Basic Operating Skills Test (Assessment)
- Course Close/Feedback
HIAB Lorry Loader Refresher Course – Tests
To pass the RTITB/BRITTOp accredited HIAB Lorry Loader Refresher Course, and receive an official RTITB or BRITTOp accredited operator certificate for a HIAB Lorry Loader, all training candidates must successfully complete 3 tests: –
- Theory Test for HIAB Lorry Loader
- Pre-Use Inspection Test for HIAB Lorry Loader
- Basic Operator Skills Test for HIAB Lorry Loader
HIAB Lorry Loader Refresher Course – Theory Test Guidance Notes
The HIAB Lorry Loader Refresher Course theory test is compiled of 25 questions.
This consists of 5 Open Questions + 20 Multiple-Choice Questions.
5 of the multiple-choice questions are Mandatory Safety Questions that must be answered correctly.
Each question carries a maximum of 4 marks.
You must achieve a minimum score of 80% to pass the HIAB Lorry Loader Refresher Course theory test. Failure to achieve 80% will result in a referral (course failed). A re-test will be required after a period of remedial training.
(You can view a mock theory test here – RTITB HIAB Lorry Loader Mock Theory Test).
HIAB Lorry Loader Refresher Course – Pre-Use Inspection Test Guidance Notes
The HIAB Lorry Loader pre-use inspection test is a visual and physical examination of the HIAB Lorry Loader.
You will be checking that the HIAB Lorry Loader is legal and safe before use.
This requires that you identify numerous parts and components of the HIAB Lorry Loader and clearly state to your examiner what potential faults or damage you are looking for.
From all potential parts/components of a HIAB Lorry Loader, there are 16 safety critical mandatory parts and components that must be identified and discussed during this pre-use inspection test.
Failure to identify and discuss just one of those 16 safety critical mandatory checks will result in a referral (course failed). A re-test will be required after a period of remedial training.
(You can view a demonstration of a HIAB Lorry Loader pre-use inspection here – HIAB Lorry Loader Pre-Use Inspection).
HIAB Lorry Loader Refresher Course – Basic Operator Skills Test Guidance Notes
The HIAB Lorry Loader Refresher Course practical skills test has been devised to examine the critical skills required of a HIAB Lorry Loader operator at a reasonable working pace, which includes:
- Mounting and Dismounting
- Starting and stopping the machine
- Deploying/stowing the HIAB lorry loader stabilisers
- Using hydraulic controls correctly and sympathetically
- Judging the position of the attachments at varying heights and orientations
- Control whilst slewing
- Loading and unloading the vehicle
- Placing loads accurately into pre-determined designated locations (using hook, hydraulic clamp, or pallet forks)
- Picking up, moving, and depositing loose material accurately into designated locations (using clamshell)
- Demonstrating sufficient situational awareness during operations
The HIAB Lorry Loader Refresher Course practical skills test is marked on a penalty points system. You gain penalty points for all safety faults that occur. Exceeding the maximum permitted penalty points will result in a referral (test failed). A re-test will be required after a period of remedial training. Your instructor will inform you of the maximum points permitted.
The HIAB Lorry Loader practical skills test is also a time restricted test, with penalty points incurred for exceeding set times. Exceeding the maximum permitted set time will result in a referral (test failed). A re-test will be required after a period of remedial training. Your instructor will inform you of the maximum permitted time.
There are also 6 safety critical factors that your examiner will be looking for and will halt the test immediately if any of those 6 safety critical factors occur. This would result in a mandatory disqualification and a referral (failed test). A re-test will be required after a period of remedial training.
Note – Your RTITB instructor will identify and explain all potential safety faults throughout the duration of your HIAB Lorry Loader Refresher Training Course and will deliver corrective training on each as they occur.
(An overview of the HIAB practical skills test marking sheet can be seen here – HIAB Lorry Loader Practical Test Marking Sheet).
HIAB Lorry Loader Refresher Course – Qualification
On successful completion of your HIAB Lorry Loader Refresher Course, you will receive an official RTITB or BRITTOp Accredited HIAB Lorry Loader Operator Certificate and a DOLIFTS issued Photo ID Card, which are valid for 3 years from the HIAB Lorry Loader Refresher Course test completion date.
The successful outcome of your HIAB Lorry Loader Refresher Course is registered onto the *RTITB NORS Database for 3 years, at which point you will be required to attend a HIAB Lorry Loader Refresher Course for re-registration.
You will receive a unique (9-digit) RTITB Operator Registration Number.
*Note – The RTITB NORS Database (National Operators Registration Scheme Database) is a secure database of RTITB qualified operators and instructors. Businesses and potential Employers can freely access NORS to easily verify the authenticity of an RTITB HIAB Lorry Loader Refresher course certificate by typing in the 9-digit operator registration number found on the certificate.
HIAB Lorry Loader Refresher Course – Prices
Please contact DOLIFTS for HIAB Lorry Loader Refresher Course pricing.
Office: 0151 678 4400
Mobile: 07743 007084
Or fill in our Contact Form
HIAB Lorry Loader Conversion Course
Our Onsite RTITB/BRITTOp Accredited HIAB Lorry Loader Conversion Courses are available to businesses throughout Wirral, Liverpool, Merseyside and North West regions.
Call DOLIFTS today to book your HIAB lorry loader operator conversion course or to discuss your training needs further – 0151 678 4400.
HIAB Lorry Loader Conversion Course Details
Who is the HIAB Lorry Loader Conversion Course for?
The RTITB and BRITTOp accredited HIAB Lorry Loader Conversion Course is designed for those who have previously received formal training on a similar type of lifting equipment and want to convert to the HIAB (Vehicle Mounted) Hydraulic Lorry Loader.
HIAB Lorry Loader Conversion Course – Eligibility
The RTITB, BRITTOp, and Health & Safety Executive (HSE) have set guidance and some eligibility criteria for attending these HIAB Lorry Loader Conversion Courses.
HIAB Lorry Loader Conversion Course – Eligibility Criteria
Experience Level – This HIAB Lorry Loader Conversion Course is for those who have previously received formal training on a similar type of lifting equipment and want to convert to the HIAB (Vehicle Mounted) Hydraulic Lorry Loader.
Age – To attend this HIAB Lorry Loader Conversion Course and operate a HIAB Lorry Loader crane attachment in the workplace you must be at least school leaving age (16). Please note, subject to a risk assessment, if you are under the age of 18 you may need to be supervised in the workplace when using a HIAB Lorry Loader until you reach the age of 18. In addition, no person under the age of 18 can use a HIAB Lorry Loader on docks, or ports.
Language – This HIAB Lorry Loader Conversion Course has multiple classroom-based theory lessons throughout. A written theory test is also mandatory. In addition, the safe use of a HIAB Lorry Loader requires that the operator reads and understands any safety signs, local safety notices, and can thoroughly understand the manufacturer’s operator handbook for the HIAB Lorry Loader being used.
The practical training aspect of this HIAB Lorry Loader Conversion Course, and the mandatory practical test of operating skills, involves continuous verbal instructions that the trainee must be able to understand and act upon in a safe manner.
Therefore, good comprehension of English language and literacy are important for attending this HIAB Lorry Loader Conversion Course.
Note – In extreme cases, an accredited translator can be used for the purposes of testing. The chosen translator must not be a candidate on the HIAB Lorry Loader Conversion Course and must not alter the sense of any of the answers given by the candidate. If required, please seek legal advice on the use of an accredited translator.
Medical – There is currently no legislation or clear medical guidance available in relation to the specific use of a HIAB Lorry Loader. In general, we would apply the HSE principle that each person’s fitness for operating a HIAB Lorry Loader should be judged individually to ensure that people with disabilities are not disadvantaged but competence in an emergency must always be considered.
We would therefore generally follow the health guidance issued by the DVSA for Group 1 entitlement if the need arises to assess capabilities for operating a HIAB Lorry Loader.
Essentially, if you are not, or would not be restricted in obtaining a UK driving licence, then there should be no restrictions in operating a HIAB Lorry Loader in normal circumstances.
Note – Individuals who suffer from a fear of heights, vertigo, giddiness or difficulty with balance must not operate a HIAB Vehicle-mounted Hydraulic Lorry Loader. All trainees are required to sign a medical declaration at the beginning of these HIAB Lorry Loader Conversion Courses.
Driving Licence – You do not need a driving licence (car/lorry licence) to attend this HIAB Lorry Loader Conversion Course, nor do you need a driving licence to operate a HIAB Lorry Loader on business premises or public areas (unless you are the sole driver/HIAB operator of the main vehicle).
HIAB Lorry Loader Conversion Course – Duration
DOLIFTS RTITB/BRITTOp accredited HIAB Lorry Loader Conversion Course is designed to instruct up to a maximum of 3 training candidates per course.
The course duration, or number of training hours/days required for a HIAB Lorry Loader Conversion Course, depends upon the number of training candidates attending the course.
- 1 HIAB Conversion Candidate = 5.5 hrs (1 day)
- 2 HIAB Conversion Candidates = 6.5 hrs (1 day)
- 3 HIAB Conversion Candidates = 7.5 hrs (1 day)
HIAB Lorry Loader Conversion Course – Syllabus
Your RTITB or BRITTOp instructor will follow recognised training and testing standards specifically devised for the HIAB Lorry Loader Conversion Course.
Training candidates will gain an understanding of current relevant legislation, be informed of the very best operating practices to be capable of using the HIAB Lorry Loader in the correct and safe manner, and use a HIAB Lorry Loader in line with current approved operating methods, and manufacturer’s instructions.
The HIAB Lorry Loader Conversion Course Syllabus includes:
- Course Introduction
- Theory
- Introduction to the HIAB Lorry Loader
- Siting of the HIAB Vehicle-mounted Hydraulic Lorry Loader
- Use of the HIAB Vehicle-mounted Hydraulic Lorry Loader Controls
- Pre-use Inspection
- Operating the HIAB Vehicle-mounted Hydraulic Lorry Loader
- Theory Test
- Pre-Use Inspection Test
- Basic Operating Skills Test (Assessment)
- Course Close/Feedback
HIAB Lorry Loader Conversion Course – Tests
To pass the RTITB/BRITTOp accredited HIAB Lorry Loader Conversion Course, and receive an official RTITB or BRITTOp accredited operator certificate for a HIAB Lorry Loader, all training candidates must successfully complete 3 tests: –
- Theory Test for HIAB Lorry Loader
- Pre-Use Inspection Test for HIAB Lorry Loader
- Basic Operator Skills Test for HIAB Lorry Loader
HIAB Lorry Loader Conversion Course – Theory Test Guidance Notes
The HIAB Lorry Loader Conversion Course theory test is compiled of 25 questions.
This consists of 5 Open Questions + 20 Multiple-Choice Questions.
5 of the multiple-choice questions are Mandatory Safety Questions that must be answered correctly.
Each question carries a maximum of 4 marks.
You must achieve a minimum score of 80% to pass the HIAB Lorry Loader Conversion Course theory test. Failure to achieve 80% will result in a referral (course failed). A re-test will be required after a period of remedial training.
(You can view a mock theory test here – RTITB HIAB Lorry Loader Mock Theory Test).
HIAB Lorry Loader Conversion Course – Pre-Use Inspection Test Guidance Notes
The HIAB Lorry Loader pre-use inspection test is a visual and physical examination of the HIAB Lorry Loader.
You will be checking that the HIAB Lorry Loader is legal and safe before use.
This requires that you identify numerous parts and components of the HIAB Lorry Loader and clearly state to your examiner what potential faults or damage you are looking for.
From all potential parts/components of a HIAB Lorry Loader, there are 16 safety critical mandatory parts and components that must be identified and discussed during this pre-use inspection test.
Failure to identify and discuss just one of those 16 safety critical mandatory checks will result in a referral (course failed). A re-test will be required after a period of remedial training.
(You can view a demonstration of a HIAB Lorry Loader pre-use inspection here – HIAB Lorry Loader Pre-Use Inspection).
HIAB Lorry Loader Conversion Course – Basic Operator Skills Test Guidance Notes
The HIAB Lorry Loader Conversion Course practical skills test has been devised to examine the critical skills required of a HIAB Lorry Loader operator at a reasonable working pace, which includes:
- Mounting and Dismounting
- Starting and stopping the machine
- Deploying/stowing the HIAB lorry loader stabilisers
- Using hydraulic controls correctly and sympathetically
- Judging the position of the attachments at varying heights and orientations
- Control whilst slewing
- Loading and unloading the vehicle
- Placing loads accurately into pre-determined designated locations (using hook, hydraulic clamp, or pallet forks)
- Picking up, moving, and depositing loose material accurately into designated locations (using clamshell)
- Demonstrating sufficient situational awareness during operations
The HIAB Lorry Loader Conversion Course practical skills test is marked on a penalty points system. You gain penalty points for all safety faults that occur. Exceeding the maximum permitted penalty points will result in a referral (test failed). A re-test will be required after a period of remedial training. Your instructor will inform you of the maximum points permitted.
The HIAB Lorry Loader Conversion course practical skills test is also a time restricted test, with penalty points incurred for exceeding set times. Exceeding the maximum permitted set time will result in a referral (test failed). A re-test will be required after a period of remedial training. Your instructor will inform you of the maximum permitted time.
There are also 6 safety critical factors that your examiner will be looking for and will halt the test immediately if any of those 6 safety critical factors occur. This would result in a mandatory disqualification and a referral (failed test). A re-test will be required after a period of remedial training.
Note – Your RTITB instructor will identify and explain all potential safety faults throughout the duration of your HIAB Lorry Loader Conversion Course and will deliver corrective training on each as they occur.
(An overview of the HIAB practical skills test marking sheet can be seen here – HIAB Lorry Loader Practical Test Marking Sheet).
HIAB Lorry Loader Conversion Course – Qualification
On successful completion of your HIAB Lorry Loader Conversion Course, you will receive an official RTITB or BRITTOp Accredited HIAB Lorry Loader Operator Certificate and a DOLIFTS issued Photo ID Card, which are valid for 3 years from the HIAB Lorry Loader Conversion Course test completion date.
The successful outcome of your HIAB Lorry Loader Conversion Course is registered onto the *RTITB NORS Database for 3 years, at which point you will be required to attend a HIAB Lorry Loader Refresher Course for re-registration.
You will receive a unique (9-digit) RTITB Operator Registration Number.
*Note – The RTITB NORS Database (National Operators Registration Scheme Database) is a secure database of RTITB qualified operators and instructors. Businesses and potential Employers can freely access NORS to easily verify the authenticity of an RTITB HIAB Lorry Loader Conversion course certificate by typing in the 9-digit operator registration number found on the certificate.
HIAB Lorry Loader Conversion Course – Prices
Please contact DOLIFTS for HIAB Lorry Loader Conversion Course pricing.
Office: 0151 678 4400
Mobile: 07743 007084
Or fill in our Contact Form
HIAB Lorry Loader Experienced Operator Course
Our Onsite RTITB/BRITTOp Accredited HIAB Lorry Loader Experienced Operator Courses are available to businesses throughout Wirral, Liverpool, Merseyside and North West regions.
Call DOLIFTS today to book your HIAB lorry loader existing operator course, or to discuss your training needs further – 0151 678 4400.
HIAB Lorry Loader Experienced Operator Course Details
Who is the HIAB Lorry Loader Experienced Operator Course for?
The RTITB and BRITTOp accredited HIAB Lorry Loader Experienced Operator Course is designed for those who have at least 6 months of current operating experience on a HIAB (Vehicle Mounted) Hydraulic Lorry Loader but have no formal training in using a Vehicle Mounted Hydraulic Lorry Loader.
HIAB Lorry Loader Experienced Operator Course – Eligibility
The RTITB, BRITTOp, and Health & Safety Executive (HSE) have set guidance and some eligibility criteria for attending these HIAB Lorry Loader Experienced Operator Courses.
HIAB Lorry Loader Experienced Operator Course – Eligibility Criteria
Experience Level – This HIAB Lorry Loader Experienced Operator Course is for those who have at least 6 months of current operating experience on a HIAB (Vehicle Mounted) Hydraulic Lorry Loader but have no formal training in using a Vehicle Mounted Hydraulic Lorry Loader.
Age – To attend this HIAB Lorry Loader Experienced Operator Course and operate a HIAB Lorry Loader crane attachment in the workplace you must be at least school leaving age (16). Please note, subject to a risk assessment, if you are under the age of 18 you may need to be supervised in the workplace when using a HIAB Lorry Loader until you reach the age of 18. In addition, no person under the age of 18 can use a HIAB Lorry Loader on docks, or ports.
Language – This HIAB Lorry Loader Experienced Operator Course has multiple classroom-based theory lessons throughout. A written theory test is also mandatory. In addition, the safe use of a HIAB Lorry Loader requires that the operator reads and understands any safety signs, local safety notices, and can thoroughly understand the manufacturer’s operator handbook for the HIAB Lorry Loader being used.
The practical training aspect of this HIAB Lorry Loader Experienced Operator Course, and the mandatory practical test of operating skills, involves continuous verbal instructions that the trainee must be able to understand and act upon in a safe manner.
Therefore, good comprehension of English language and literacy are important for attending this HIAB Lorry Loader Experienced Operator Course.
Note – In extreme cases, an accredited translator can be used for the purposes of testing. The chosen translator must not be a candidate on the HIAB Lorry Loader Experienced Operator Course and must not alter the sense of any of the answers given by the candidate. If required, please seek legal advice on the use of an accredited translator.
Medical – There is currently no legislation or clear medical guidance available in relation to the specific use of a HIAB Lorry Loader. In general, we would apply the HSE principle that each person’s fitness for operating a HIAB Lorry Loader should be judged individually to ensure that people with disabilities are not disadvantaged but competence in an emergency must always be considered.
We would therefore generally follow the health guidance issued by the DVSA for Group 1 entitlement if the need arises to assess capabilities for operating a HIAB Lorry Loader.
Essentially, if you are not, or would not be restricted in obtaining a UK driving licence, then there should be no restrictions in operating a HIAB Lorry Loader in normal circumstances.
Note – Individuals who suffer from a fear of heights, vertigo, giddiness or difficulty with balance must not operate a HIAB Vehicle-mounted Hydraulic Lorry Loader. All trainees are required to sign a medical declaration at the beginning of these HIAB Lorry Loader Experienced Operator Courses.
Driving Licence – You do not need a driving licence (car/lorry licence) to attend this HIAB Lorry Loader Experienced Operator Course, nor do you need a driving licence to operate a HIAB Lorry Loader on business premises or public areas (unless you are the sole driver/HIAB operator of the main vehicle).
HIAB Lorry Loader Experienced Operator Course – Duration
DOLIFTS RTITB/BRITTOp accredited HIAB Lorry Loader Experienced Operator Course is designed to instruct up to a maximum of 3 training candidates per course.
The course duration, or number of training hours/days required for a HIAB Lorry Loader Experienced Operator Course, depends upon the number of training candidates attending the course.
- 1 Experienced HIAB Operator = 5.25 hrs (1 day)
- 2 Experienced HIAB Operators = 7.5 hrs (1 day)
- 3 Experienced HIAB Operators = 11.5 hrs (2 days)
HIAB Lorry Loader Experienced Operator Course – Syllabus
Your RTITB or BRITTOp instructor will follow recognised training and testing standards specifically devised for the HIAB Lorry Loader Experienced Operator Course.
Training candidates will gain an understanding of current relevant legislation, be informed of the very best operating practices to be capable of using the HIAB Lorry Loader in the correct and safe manner, and use a HIAB Lorry Loader in line with current approved operating methods, and manufacturer’s instructions.
The HIAB Lorry Loader Experienced Operator Course Syllabus includes:
- Course Introduction
- Theory
- Introduction to the HIAB Lorry Loader
- Introduction to the Hydraulic System
- Siting of the HIAB Vehicle-mounted Hydraulic Lorry Loader
- Correct Deployment of the Stabiliser Legs
- Use of the HIAB Vehicle-mounted Hydraulic Lorry Loader Controls
- Pre-use Inspection
- Operating the HIAB Vehicle-mounted Hydraulic Lorry Loader
- Theory Test
- Pre-Use Inspection Test
- Basic Operating Skills Test (Assessment)
- Course Close/Feedback
HIAB Lorry Loader Experienced Operator Course – Tests
To pass the RTITB/BRITTOp accredited HIAB Lorry Loader Experienced Operator Course, and receive an official RTITB or BRITTOp accredited operator certificate for a HIAB Lorry Loader, all training candidates must successfully complete 3 tests: –
- Theory Test for HIAB Lorry Loader
- Pre-Use Inspection Test for HIAB Lorry Loader
- Basic Operator Skills Test for HIAB Lorry Loader
HIAB Lorry Loader Experienced Operator Course – Theory Test Guidance Notes
The HIAB Lorry Loader Experienced Operator Course theory test is compiled of 25 questions.
This consists of 5 Open Questions + 20 Multiple-Choice Questions.
5 of the multiple-choice questions are Mandatory Safety Questions that must be answered correctly.
Each question carries a maximum of 4 marks.
You must achieve a minimum score of 80% to pass the HIAB Lorry Loader Experienced Operator Course theory test. Failure to achieve 80% will result in a referral (course failed). A re-test will be required after a period of remedial training.
(You can view a mock theory test here – RTITB HIAB Lorry Loader Mock Theory Test).
HIAB Lorry Loader Experienced Operator Course – Pre-Use Inspection Test Guidance Notes
The HIAB Lorry Loader Experienced Operator pre-use inspection test is a visual and physical examination of the HIAB Lorry Loader.
You will be checking that the HIAB Lorry Loader is legal and safe before use.
This requires that you identify numerous parts and components of the HIAB Lorry Loader and clearly state to your examiner what potential faults or damage you are looking for.
From all potential parts/components of a HIAB Lorry Loader, there are 16 safety critical mandatory parts and components that must be identified and discussed during this pre-use inspection test.
Failure to identify and discuss just one of those 16 safety critical mandatory checks will result in a referral (course failed). A re-test will be required after a period of remedial training.
(You can view a demonstration of a HIAB Lorry Loader pre-use inspection here – HIAB Lorry Loader Pre-Use Inspection).
HIAB Lorry Loader Experienced Operator Course – Basic Operator Skills Test Guidance Notes
The HIAB Lorry Loader Experienced Operator Course practical skills test has been devised to examine the critical skills required of a HIAB Lorry Loader operator at a reasonable working pace, which includes:
- Mounting and Dismounting
- Starting and stopping the machine
- Deploying/stowing the HIAB lorry loader stabilisers
- Using hydraulic controls correctly and sympathetically
- Judging the position of the attachments at varying heights and orientations
- Control whilst slewing
- Loading and unloading the vehicle
- Placing loads accurately into pre-determined designated locations (using hook, hydraulic clamp, or pallet forks)
- Picking up, moving, and depositing loose material accurately into designated locations (using clamshell)
- Demonstrating sufficient situational awareness during operations
The HIAB Lorry Loader Experienced Operator Course practical skills test is marked on a penalty points system. You gain penalty points for all safety faults that occur. Exceeding the maximum permitted penalty points will result in a referral (test failed). A re-test will be required after a period of remedial training. Your instructor will inform you of the maximum points permitted.
The HIAB Lorry Loader Experienced Operator practical skills test is also a time restricted test, with penalty points incurred for exceeding set times. Exceeding the maximum permitted set time will result in a referral (test failed). A re-test will be required after a period of remedial training. Your instructor will inform you of the maximum permitted time.
There are also 6 safety critical factors that your examiner will be looking for and will halt the test immediately if any of those 6 safety critical factors occur. This would result in a mandatory disqualification and a referral (failed test). A re-test will be required after a period of remedial training.
Note – Your RTITB instructor will identify and explain all potential safety faults throughout the duration of your HIAB Lorry Loader Experienced Operator Training Course and will deliver corrective training on each as they occur.
(An overview of the HIAB practical skills test marking sheet can be seen here – HIAB Lorry Loader Practical Test Marking Sheet).
HIAB Lorry Loader Experienced Operator Course – Qualification
On successful completion of your HIAB Lorry Loader Experienced Operator Course, you will receive an official RTITB or BRITTOp Accredited HIAB Lorry Loader Operator Certificate and a DOLIFTS issued Photo ID Card, which are valid for 3 years from the HIAB Lorry Loader Experienced Operator Course test completion date.
The successful outcome of your HIAB Lorry Loader Experienced Operator Course is registered onto the *RTITB NORS Database for 3 years, at which point you will be required to attend a HIAB Lorry Loader Refresher Course for re-registration.
You will receive a unique (9-digit) RTITB Operator Registration Number.
*Note – The RTITB NORS Database (National Operators Registration Scheme Database) is a secure database of RTITB qualified operators and instructors. Businesses and potential Employers can freely access NORS to easily verify the authenticity of an RTITB HIAB Lorry Loader Experienced Operator course certificate by typing in the 9-digit operator registration number found on the certificate.
HIAB Lorry Loader Experienced Operator Course – Prices
Please contact DOLIFTS for HIAB Lorry Loader Experienced Operator Course pricing.
Office: 0151 678 4400
Mobile: 07743 007084
Or fill in our Contact Form
HIAB Lorry Loader Training Standards
Dolifts FLT Training Ltd, and our instructors, are RTITB Accredited, experienced, and hold current liability insurances.
All HIAB Lorry Loader training courses, and issued operator certification, meet RTITB standards, and HSE ACOP L117 requirements.
Our Onsite HIAB Lorry Loader training packages can be designed to work around you and the working schedule/shift patterns of your business.
Still looking for HIAB Lorry Loader Training Courses near you?
Call DOLIFTS Today!
Tele: 0151 678 4400
Mobile: 07743 007084
More Onsite Training Courses
HIAB Vehicle Mounted Hydraulic Lorry Loader Training Courses - FAQs
Do you deliver HIAB Lorry Loader Training Courses near me?
We can provide RTITB and BRITTOp accredited HIAB Lorry Loader Training Courses anywhere in the North of England for Novice, Refresher, Conversion, and Experienced operators.
Do you provide onsite HIAB Lorry Loader Training Courses for businesses?
Yes. We provide onsite HIAB Lorry Loader Training Courses for many businesses in the North of England. Our HIAB Lorry Loader instructors have a wealth of experience in meeting the needs of business customer across North England.
How much do HIAB Lorry Loader Training Courses cost?
This depends on the type of HIAB Lorry Loader course that you need. For HIAB Lorry Loader Training Course prices, please call DOLIFTS on 0151 678 4400.
How long are HIAB Lorry Loader Training Courses?
This depends on the type of HIAB Lorry Loader Training Course, your experience level, and the number of people on your course. A novice HIAB Lorry Loader Course can take 1 to 2 days. A Refresher course can take 1 day. A Conversion course can take 1 day, and an Experienced operator course can take 1 to 2 days.
A Brief History of HIAB Lorry Loader
Did you know this about the HIAB Lorry Loader?
HIAB Vehicle Mounted Hydraulic Lorry Loader.
HIAB has become a generic name for any vehicle with a mounted crane, boom lift or loader crane, regardless of manufacturer.
Hydrauliska Industri AB (HIAB) is a Swedish manufacturer of loader cranes, demountable container handlers, forestry cranes, truck-mounted forklifts and tail lifts. The company is owned by the Cargotec Corporation.
The name, HIAB, comes from the commonly used abbreviation of Hydrauliska Industri AB, a company founded in Hudiksvall, Sweden 1944 by Eric Sundin, a ski manufacturer who saw a way to utilize a truck’s engine to power loader-cranes through the use of hydraulics.
HIAB invented the world’s first hydraulic truck-mounted crane in 1947. On the other side of the Bothnian Sea in Raisio, Finland about the same time, three brothers, Mikko, Mauno and Martti Terho developed a mechanical cable-operated interchangeable platform-loader (Cablelift) that utilised the truck’s front winch, with which it was possible to use a variety of platform bodies. In 1949 they started Multilift to manufacture their innovative load handling equipment.
The roots of today’s HIAB Company lie in a series of acquisitions from 1977 onwards, when Partek Corporation embarked on a comprehensive diversification and internationalisation strategy. Founded in 1898, Partek Corporation was one of the oldest industrial companies in Finland, originally producing limestone and later a versatile range of materials for the construction industry.
In 1977 Partek decided to expand into the engineering industry and thereby decrease its dependence on domestic construction when it first bought named Multilift. Eight years later, in 1985, the company bought HIAB with its forestry-crane subsidiary Jonsered. In 1988 they bought Loglift – as the name implies, also a forestry crane manufacturer.
During the late 1990s Partek strategically restructured itself into an engineering company, fully divesting its construction-materials activity and making several acquisitions in the load-handling equipment business.
The load-handling side of Partek expanded in 2000 with the acquisition of the Zeteco Group (including among others ZEPRO and WALTCO tail lifts). During the same year the truck-mounted forklift business was acquired, bringing today’s MOFFETT and PRINCETON PIGGY BACK brands into the company.
KONE Corporation acquired Partek in 2002. In 2004 the load-handling functionality was renamed after its most valuable product brand, HIAB. On 1 June 2005 KONE Corporation demerged into new KONE and Cargotec Corporation (listed in Helsinki Stock Exchange). Cargotec consists of HIAB load-handling, Kalmar container-handling and MacGREGOR marine-cargo handling solutions.
Source – HIAB Wikipedia